Solution and development of cutlery packing machine
1. All servo system control of automatic packing machine, all independent editing, all controlled by software, convenient function adjustment and technical upgrade, always advanced.
2. High-sensitivity photoelectric eye color mark tracking, digital input of sealing position, making the sealing position more accurate.
3. Positioning and stopping function, non-stick knife, CPP, OPP single-sided heat sealing, color packaging film can be packaged without wasting paint.
4. It can be actively connected with the paper cutter, and there is no need to manually place the paper towel, saving labor costs.
5. When there is no tissue output from the cutter, the packaging machine will not take off the film, and no empty bags will occur.
Solution to the problem of cutlery packaging machine:
1. The film orientation and tension balance bar can be adjusted, as well as the height of the film guide roller. Generally, the scheduling of the film guide roller can be adjusted.
2. The weight of the pendulum is too light, and it is easy to run the film, and the tension of the pendulum can be adjusted reasonably.
3. If the upper film violates the clamping, the film guide roller can be adjusted upward; if the film material falls from the clamping, the film guide roller can be adjusted downward. It is easy to make the running film too high in the object, so the problem can usually be solved.
4. Assuming that the above is invalid, it can be handled by adjusting the angle of the upper triangle. In this case, there are no equipment automatic packing machine factory components, perhaps some manufacturers are of poor quality, and the equipment level accuracy is not perfect. Readjust the vertical orientation of the water steepness of the triangle.
5. In the process of multi-item packaging, the equipment cannot detect the packaging, and the packaging is damaged during the packaging process, making the packaging operation impossible.
Solution: This is because the fixed length feature is used to keep the object in a fixed orientation. The gap between the objects in the heat shrink packaging machine affects the electric eye detection during bundling and packaging, and only the electric eye detection of the heat shrink machine is required. The angle can be adjusted to a tilted angle to prevent the above phenomenon. Use the fixed length feature.
How will packaging machinery develop in the future?
1. Simple and convenient
In the future, packaging machinery must be versatile, easy to adjust and easy to operate. Computer-based smart meters will be the new trend in the controllers of food packaging machines, tea bag packaging machines and nylon triangular bag packing machines. OEM manufacturers and end consumers will tend to buy packaging machinery that is easy to operate and easy to set up. In particular, there was a lot of layoffs in the manufacturing industry at the time, and the need for a simple operating system would change with each passing day. Structural motion control is related to the quality of packaging machinery performance and can be accomplished through motors, encoders, digital control (NC), power load control (PLC) and other high-precision controllers. Therefore, in order to gain a place in the packaging market of the future, effective customer service and mechanical protection will be one of the most important race conditions.
2. High productivity
Packaging machinery manufacturers are paying more and more attention to the development of fast and low-cost packaging equipment. The future trend is to be smaller, more sensitive, and more versatile. This trend also includes saving time and reducing costs, so the packaging profession is looking for combined, simplified and mobile packaging equipment. Xiamen Shuangli Packaging Equipment Co., Ltd. has been widely used in packaging machinery automation, such as PLC equipment, data collection systems, etc.
3. Intelligent high automation
In the future, the packaging machinery profession will cooperate with the trend of industrial automation, and technological development will develop in four directions:
One is the diversification of mechanical functions. Industrial and traded products tend to be refined and diversified. Diversified and flexible packaging machines with multiple switching functions can meet market demands in an ever-changing environment.
The second is the standardization and modularization of structural planning. After a modular plan that fully utilizes the original model, it is possible to convert the new model within a short period of time.
Third, intelligent control. At present, wet wipes machine manufacturers generally use PLC power load controllers. Although a PLC has great flexibility, it still does not have the power of a computer (including software).
The fourth is the high-precision structure. Structural planning and structural motion manipulation are related to the performance of paper bag packing machine. They can be implemented by electric motors, encoders, digital control (NC), power load control (PLC) and other high-precision controllers, and moderately expanded products to develop packaging equipment for high-tech industries.
4. Matching
Only pay attention to the production of the main engine, without considering the completeness of the supporting equipment, the function of the packaging machinery will not be exerted. Therefore, the development of supporting equipment to expand the function of the host to a greater extent is a key factor to improve the competitiveness and economy of the equipment market. Germany should pay attention to the integrity of the complete set of equipment when providing users with automatic production lines or production line equipment. Whether it is a high-tech value-added product or a simple equipment category, it will be supplied according to matching requirements.
